305_308,EN.book Page 11 Saturday, November 8, 2014 12:33 PM
Maintenance
WARNING
When the robotic lawnmower is
turned upside down the main switch
must always be in the 0 position.
The main switch should be in the
0 position during all work on the
robotic lawnmower's chassis, such
as cleaning or replacing the blades.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the robotic
lawnmower. Never use solvents for cleaning.
•
Inspect the robotic lawnmower each week and
replace any damaged or worn parts.
Check especially that the blades and blade disc
are not damaged. Check also that the blades can
pivot freely. Replace all blades and screws at the
same time if necessary so that the rotating parts
are kept balanced. See 8.7 Blades on page 64.
1. INTRODUCTION AND SAFETY
English - 11