Blades - Husqvarna 305 Operator's Manual

305_308,EN.book Page 64 Saturday, November 8, 2014 12:33 PM

8.7 Blades

WARNING
Always use original blades and screws
when replacing. Only replacing the
blades and reusing the screw can result
in a screw wearing during mowing and
shearing. The blades can then be
propelled from under the body and
cause serious injury.
There are three blades on the robotic lawnmower,
which are screwed into the blade disc. All three blades
and screws must be replaced at the same time to
obtain a balanced mowing system.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only. Please
contact your dealer for more information.
To replace the blades:
1. Set the main switch in position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its hole aligns with
the screw for the blade. Only applicable for
Automower ® 308.
5. Remove the screw. Use a straight slot or
cross-tip screwdriver.
6. Remove the blade and the screw.
7. Screw on the new blade and the new screw.
64 - English
8. MAINTENANCE
3012-1023
3012-272
3018-087
3012-1095b