Welcome!
Congratulations on your purchase of the one (1) fiber HDMI extender, HDFX-
100-TR. This manual contains information that will assist you in installing and
operating the product.
Product Description
The HDFX-100-TR transmits all HD resolutions up to 1080p at 60Hz of digital graphic
data up to 1km (3,280 feet) over one (1) LC single-mode fiber or 300m (985feet) over
one (1) LC multi-mode fiber(50㎛), directly connected between HDMI sources and
displays. The Source to Transmitter and Receiver to display device should be
connected to each of them by HDMI copper cable. HDFX-100-TR supports HDMI digital
graphic data and HDCP (High Definition Contents Protection) .
The Shipping Group of HDFX-100-TR;
Tx and Rx boxes: One (1) Transmitter (Tx) Box and One (1)
Receiver (Rx) Box.
AC/DC power adapter: Two (2) +5V units
User's Manual
HDMI Input
(DVD Player)
Figure 1 – Overall Connection of Optical HDFX-100
1-1 Welcome, Product Description
Audio/Display
Output
System Requirements for Setup
□
Hardware requirements
▪
DVD, Blu-Ray or media receiver with standard HDMI ports.
▪
In case of using PC as a graphic source, regardless of OS
version embedded HDMI ports.
▪
Only HDMI TVs or monitors are applicable.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
□
Software requirements
▪
No special needs, but make sure that media contents protected
by HDCP should be played with HDCP certified players and
TVs.
□
AC/DC Power Adapter Technical Advisory
▪
Enclosed Power Adaptor supply power to both boxes of (Tx)
and (Rx).
□
Connection Advisory
▪
It is highly recommend that HDMI media source is directly
connected into HDMI display output via HDFX-100-TR without
connection to incompatible distributor, switcher and selector.
1-2 System Requirements for Setup