Welcome! System Requirements for Setup Congratulations on your purchase of the Stretch DVI DDFX-100-TR Optical Dual Link DVI (Digital Visual Interface) Extension Module. This manual Hardware requirements contains information that will assist you in installing and operating the product. ...
Installation Step 5 Important: Please keep the installation procedure below. Improper or no Plug the transmitter to the DVI receptacle of the DVI source such as PC and the receiver to the DVI receptacle of the display as shown in figure 3. operation may result if the start-up sequence is not correctly followed.
- Ensure that all plugs and jacks used by external power supplies (both resolution and timing information of the display. Opticis and others) are firmly connected. Ensure that the Power and status DDFX-100-TR supports Self-EDID programming. It is the procedure that reads the EDID LED ON.
Supports DVI1.0, fully one (1) year from the date of purchase from Opticis or its authorized resellers. implemented by fiber-optic communication and DDC2B by virtual If a product does not work as warranted during the applicable warranty period, DDC.
FCC/CE emission limits. Changes or modifications not expressly approved by the party responsible for compliance could void the For technical support, check with the Opticis web site www.opticis.com or user s authority to operate the equipment. contact techsupp@opticis.com...