Regulatory Statements Two (2) fibers Detachable DisplayPort Extender Pictorials Figure 1 – Overall Connection of DPFX-100-TR Figure 2 – Position of the LED Figure 3 – Fiber numbering & Caution on both fiber ports Figure 4 – Connection of optical fiber User’s Manual for the...
Welcome! System Requirements for Setup Congratulations on your purchase of the two (2) fibers DisplayPort extender, DPFX-100-TR. This manual contains information that will assist you in □ Hardware requirements installing and operating the product. ▪ You have to have a DisplayPort source and display. It should...
Installation Note1: The maximum extension length by multi-mode fiber is 300 meters. Note2: Be recommended NOT to use any intermediate cable or adapter Important: Please keep the installation procedure below. Improper or no between them to avoid undesirable performance degradation. operation may result if the start-up sequence is not correctly followed.
- Ensure that the DisplayPorts are firmly plugged in to the DisplayPort source and There are no user serviceable parts. Refer all service and repair issues to Opticis display. or its authorized distributor.
If a product does not work as warranted during the applicable warranty period, 10.8Gbps (2.7Gbps per lane). Opticis shall, at its option and expense, repair the defective product or part, d eliver to customer an equivalent product or part to replace the defective item, ...
For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...