Advertisement
Welcome!
Congratulations on your purchase of the one (1) fiber DisplayPort extender
with copper extension, DPFX-700-TR. This manual contains information that
will assist you in installing and operating the product.
Product Description
DisplayPort 1.2 one(1) fiber optic detachable extender, DPFX-700, extends
DisplayPort 1.2 signal up to 200m (656feet) and transmits 4K UHD
(4096x2160) at 60Hz over one(1) LC multi-mode fiber. Cutting-edge
technology of Opticis reduces limits in installation by providing an option for
longer copper extension.
DPFX-700-TR transmit uncompressed and transparent data signal even when
used with up to 2 m copper cable as an intermediary. This enables installation
of the product in the limited spaced area in such our small module type
extender cannot be used. 2m copper cable is provided in the shipping group.
Furthermore, to meet all the needs of the customers, DPFX-700-TR is fully
compatible with using DPFX-300 as a pair. Depending on the circumstances,
customer can choose to use direct connection type module on one side, and
copper extension type module on the other side.
DPFX-700-TR gives slim, light, and easy installation with perfect electrical
isolation, but without electrical hazard and interference. It is operated external
DC power adapter which is supplied in the shipping group.
Figure 1 – Overall Connection of DPFX-700-TR
1-1 Welcome, Product Description
System Requirements for Setup
□
Hardware requirements
▪
You must have a DisplayPort source and display. It should
support the maximum graphic resolution feature of displays to
be connected.
▪
No special requirements of memory size, CPU speed and
chipsets, if you've already properly installed your DisplayPort
systems or graphic cards.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to the
installation with the optical link.
Software requirements
□
No special restrictions, if you've already properly installed your
▪
DisplayPort systems.
▪
FW upgradable via micro USB port (TBD)
□
Power Technical Advisory
▪
Enclosed Power Adaptors should supply power for both
Transmitter and Receiver.
□
Connection Advisory
▪
It is highly recommended that DisplayPort source is
connected to DisplayPort display output via DPFX-700-TR
without any connection with incompatible distributor,
switcher and selector.
The Shipping Group of DPFX-700-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
Two (2) 2m Male to Male DisplayPort copper cable
Two (2) 5V 1A power adapter
User's Manual
※ If the purchase was made with mixed pair of DPFX-700 and
DPFX-300, the shipping group may vary.
1-2 System Requirements for Setup
Advertisement
