opticis HDFX-100-TR User Manual
  1. Manuals
  2. Brands
  3. opticis Manuals
  4. Extender
  5. HDFX-100-TR
  6. User manual

opticis HDFX-100-TR User Manual

Hide thumbs Also See for HDFX-100-TR:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
One (1) fiber Detachable
HDMI Extender
User's Manual for the
HDFX-100-TR
Manual Contents
__________________________________________
Manual Contents
Pictorials
Figure 1 - Overall Connection of HDFX-100-TR
Figure 2 - 1:1 Master Switch Setting
Figure 3 - 1: N Slave Switch Setting
Figure 4 - Connection of HDMI cable between
Tx box and HDMI source
Figure 5 - Connection of HDMI cable between
Rx box and display
Figure 6 - Connection of one (1) LC single-mode fiber
Figure 7 - Connection of AC/DC power adaptor
Figure 8 - Transmitter Switch Setting Change
Figure 9 - HDFX-100-T Monitor EDID LED Response
Figure 10 - Transmitter Switch Setting Change
Figure 11 - HDFX-100-T Default EDID LED Response
1-0 Manual Contents
1-0
1-1
1-2
1-3
1-8
1-9
1-10
1-11
1-12
1-1
1-3
1-3
1-4
1-4
1-5
1-5
1-6
1-7
1-7
1-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDFX-100-TR and is the answer not in the manual?

Questions and answers

Related Manuals for opticis HDFX-100-TR

Summary of Contents for opticis HDFX-100-TR

  • Page 1 1-12 One (1) fiber Detachable Pictorials HDMI Extender Figure 1 – Overall Connection of HDFX-100-TR Figure 2 – 1:1 Master Switch Setting Figure 3 – 1: N Slave Switch Setting Figure 4 – Connection of HDMI cable between Tx box and HDMI source Figure 5 –...

  • Page 2: System Requirements For Setup

    ▪ Proper initial trial of the entire platform with its application using The HDFX-100-TR transmits all HD resolutions up to 1080p at 60Hz of digital graphic a short length copper cable is recommended prior to install with data up to 1km (3,280 feet) over one (1) LC single-mode fiber or 300m (985feet) over the optical link.

  • Page 3: Installation

    Carefully unpack the contents in the shipping group. Step 2 Please make sure HDFX-100-TR switch such as ‘Figure 2’. In normal operation, Power and Status LED are on. If Source device have HDCP capacity, both Transmitter and Receiver HDCP LED will be turned on.
  • Page 4 Switch Setting Check Remove the module dust covers and connect Transmitter and Receiver over Please check Table1. HDFX-100-TR Switch setting, Normal HDMI to HDMI setting LC to LC single-mode fiber, such as Fig. 6. Ensure the LC connector is fully is as below;...

  • Page 5: Troubleshooting

    - Check Receiver HDMI cable is firmly connected or Monitor power is turned ON. The display displays only black Screen.  Check DC jacks (both Opticis Transmitter and Receiver) are firmly connected.  Ensure that PWR LED is ON. ...

  • Page 6: Maintenance, Technical Support

     Extension limit: There are no user serviceable parts. Refer all service and repair issues to Opticis Up to 1km (3280feet) over one (1) single-mode fiber or 300m or its authorized distributor.

  • Page 7: Warranty Information

    15 and 2 of FCC Rules, EN 55022/55024/61000-3 for CE certification. These limits are designed to provide reasonable protection Opticis shall, at its option and expense, repair the defective product or part, d against harmful interference when the equipment is operated in a residential eliver to customer an equivalent product or part to replace the defective item, installation.
  • Page 8 #907, Byucksan Technopia, 434-6 Sangdaewon-Dong, Chungwon-Gu, Sungnam City, Gyeonggi-Do, 462-716 South Korea Tel: +82 (31) 737-8033~8 Fax:+82 (31) 737-8079 www.opticis.com For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...

Table of Contents