Regulatory Statements Two (2) fibers Detachable HDMI Extender Pictorials Figure 1 – Overall Connection of HDFX-250-TR Figure 2 – Position of the LED Figure 3 – Fiber numbering & Caution on both fiber ports Figure 4 – Connection of optical fiber User’s Manual for the...
In case of using PC as a graphic source, regardless of OS Product Description version embedded HDMI ports. New optical HDMI extender, HDFX-250-TR is designed compact enough to be ▪ Only HDMI TVs or monitors are applicable. fitted into various installation environments, and enables to transmit WUXGA ▪...
Installation Note1: The maximum extension length by multi-mode fiber is 300 meters. Note2: Be recommended NOT to use any intermediate cable or adapter Important: Please keep the installation procedure below. Improper or no between them to avoid undesirable performance degradation. operation may result if the start-up sequence is not correctly followed.
- Ensure that the HDMI ports are firmly plugged in to the source and display. There are no user serviceable parts. Refer all service and repair issues to Opticis - Ensure that the transmitter and receiver modules plugged correctly to the source or its authorized distributor.
300 meters (985feet) for WUXGA (1920x1200) or 1080p at 60Hz If a product does not work as warranted during the applicable warranty period, Opticis shall, at its option and expense, repair the defective product or part, d refresh rate over two (2) LC multi-mode fibers (50/125um).
For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...