Related Manuals for opticis HDWX-100-TR
Summary of Contents for opticis HDWX-100-TR
- Page 1 Ver. 1.2 WWW.OPTICIS.COM Wireless HDMI Extender, HDWX-100-TR User’s Manual Doc No. : OE-HW130903 / Rev1.2 - 1 -...
-
Page 2: Table Of Contents
Contents Welcome! .............................- 3 - Product Description ..........................- 3 - Shipping Group ............................- 3 - Supporting Resolutions ........................- 3 - Applications ............................- 4 - Systems Requirements for Setup ......................- 4 - Installation ............................- 5 - LED Indication ............................- 6 - SW &... -
Page 3: Welcome
HDWX-100-T, if it is connected to the source by USB interface. The HDWX-100-TR supports the digital video data of full HD up to 1920x1080p at 60Hz and 7.1ch surround audio and transmits the signal up to 30 meters (100feet). It also enables to distribute one (1) video source up to four (4) displays and makes four (4) local keyboard and mouse accesses to the source. -
Page 4: Applications
OS. AC/DC Power Adapter Technical Advisory The HDWX-100-TR has a reverse voltage protection circuit and receiver (Rx) module also has overcurrent protection circuit. The HDWX-100-TR is designed to use mainly external +5V AC/DC power adaptor. -
Page 5: Installation
Installation Important: Please keep the installation procedure below. Improper or no operation may result if the start-up sequence is not followed correctly. Note: If you change a source to another source such as PC, Camcorder, DVD Player or Blu-ray player, you have to reset the power of all TXs and RXs by re-plugging of the +5V power adaptor. -
Page 6: Led Indication
Fig. 2: Configuration of Receiver, HDWX-100-R LED Indication HDWX-100-T and HDWX-100-R have two (2) LEDs for Power and Wireless status located on the top. • Power status LED (Blue) When power is applied, the blue LED will be turned on. •... - Page 7 It will take a few seconds to change the menu when the wireless HDMI connection has been made. Step 1 When you connect HDWX-100-TR for the first time, the screen will be shown as below. Press [M] button to connect into the transmitter. Step 2 Main Menu During the wireless HDMI connection, by press and hold [M] button for 2~3sec, user can enter GUI menu as below.
- Page 8 To select a menu, press [M] button. To return the main menu, press and hold [M] button for 2~3sec. To move to the right, press [ ] button. ▶ Step 3 Connectivity menu: To connect to the other transmitter. Step 3-1-1 PIN method for connectivity [default] If user want to find a transmitter to connect or change the other transmitter, press [▼] button to select and press [M] button to connect the transmitter.
- Page 9 Note: When the connection is completed, it exits from GUI menu automatically. Step 3-2 Disconnection To disconnect the transmitter, press [ ] button. ▶ To exit from GUI menu, press and hold [M] button for 2~3sec. To return to the previous page, press and hold [ ▶...
- Page 10 Select one of menus to be used from by pressing [▼] and [M] button. User can edit the name in ‘New title’ by selecting the characters as below. Press [ ▶ ] and [▼] buttons to move and press [M] button to select it. Then, press Complete to save the name.
- Page 11 There are three (3) sub menus in General Settings, Latency Mode, Wireless Channel and WPS method as shown below. Step 4-1 Latency Mode User can select Theater mode or Game mode. Game mode has lower latency than Theater mode. To exit from GUI menu, press and hold [M] button for 2~3sec.
- Page 12 Step 4-3 WPS Method User can select PIN Code or PBC Button. In case of PBC Button mode, user needs to press PBC button on the TX side for pairing. To exit from GUI menu, press and hold [M] button for 2~3sec. ...
- Page 13 There are 2 sub menus in System Info, Signal Strength and System Information as below. Step 5-1 User can monitor the current Signal Strength of the receiver as below. Step 5-2 User can check the information of transmitter and receiver such as IP address and MAC address as below.
-
Page 14: Product Specifications
Product Specifications Designed in a small shape with plastic enclosure so as to directly hook up the PC or display Wi-Fi Standard: 802.11n, 5GHz, 2x2 MIMO, two internal antennas (Maximum Throughput: 300Mbps) Supports WPA/WPA2 and QoS Video Resolution: up to 1920x1080 at 60Hz ... -
Page 15: 5Ghz Wi-Fi Channels
5GHz Wi-Fi Channels Because of wireless signal regulations, HDWX-100-TR is managed by two different firmwares according to the shipment locations (US version and Europe version). - US Version: US, Korea and others. - Europe Version: Europe, Japan, and others. Available Channels Band DFS (US &Japan) -
Page 16: Warranty Information
(1) year from the date of purchase from Opticis or its authorized resellers. If a product does not work as warranted during the applicable warranty period, Opticis shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective itemor refund to customer the purchase price paid for the defective product. -
Page 17: Fcc/Ce Statement
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. - Page 18 Sungnam-si, Gyunggi-do, 463-782 South Korea Te l: +82 (31) 719-8033 Fax: +82 (31) 719-8032 www.opticis.com tosales@opticis.com For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com. - 18 -...