One (1) Fiber Detachable HDMI Certifications 2.0 Extender With Diagnosis features, Pictorials Figure 1 – Overall Connection of HDX-1F20-TR Figure 2 – Position of the LED Figure 3 – Connection of optical fiber User Manual HDX-1F20-TR Doc No. : OE-HD241120/ V1.0...
□ Enclosed Power Adaptors should supply power for both Combining robust performance, advanced diagnostics, and versatile extension Transmitter and Receiver. options, the HDX-1F20-TR is an ideal solution for demanding AV installations. Connection Advisory □ It is highly recommended that HDMI source is connected to HDMI display output via HDX-1F20-TR without any connection with incompatible distributor, switcher and selector.
Installation Step 6 If the system does not work properly, go to the page 1-5 for trouble shooting. Important: Please keep the installation procedure below. Failure in operation may result if the start-up sequence is not correctly followed. Note1: Please DO NOT look directly into the LC receptacles of the Transmitter, while it is powered on.
benign environment free from the liquid or dirt contamination. Operating temperature: 0°C to 50°C There are no user serviceable parts. Refer all service and repair issues to Opticis Storage temperature: -30°C to 70°C or its authorized distributor.
If a product does not work as warranted during the applicable warranty period, Caution – Use of controls or adjustments or performances of procedures Opticis shall, at its option and expense, repair the defective product or part, deli other than those specified herein may result in hazardous radiation exposure.
Page 6
3F, 305, Sanseong-daero Sujeong-gu, Seongnam-si Gyeonggi-do, 13354 South Korea Tel: +82 (31) 719-8033 Fax: +82 (31) 719-8032 www.opticis.com For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...
Need help?
Do you have a question about the HDX-1F20-TR and is the answer not in the manual?
Questions and answers