Product Specifications Warranty Information Connection with BR-500, Certifications Pictorials Figure 1 – Overall Connection of DPFX-250-TR Figure 2 – Position of the LED Figure 3 – Fiber numbering & Caution on both fiber ports Figure 4 – Connection of optical Figure 5 –...
Congratulations on your purchase of the two (2) fibers DisplayPort extender, □ Hardware requirements DPFX-250-TR. This manual contains information that will assist you in ▪ installing and operating the product. You must have a DisplayPort source and display. It should...
Step 3 The Power LED will be turned on when DPFX-250-TR is connected to DisplayPort interface of signal source and display and the Status LED will blink three (3) times. Then the Status LED will blink again when the whole connection is made.
Each 200m and 300m of DisplayPort signal transmission has successfully tested There are no user serviceable parts. Refer all service and repair issues to Opticis when using GTX960 as a display source and ASUS PA328Q as a display.
If a product does not work as warranted during the applicable warranty period, 21.6Gbps (5.4Gbps per lane). Opticis shall, at its option and expense, repair the defective product or part, del iver to customer an equivalent product or part to replace the defective item, or r ...
Fax: +82 (31) 719-8032 www.opticis.com Figure 7 – Connection of DPFX-250 and BR-500 *Note: BR-500 is applicable to use with Opticis DisplayPort 1.2 fiber-optic For order support, please contact your Distributor or Reseller. transmitters ONLY. For technical support, check with the Opticis web site www.opticis.com or contact techsupp@opticis.com...