Operating Procedures; Serial Number Location - Ezgo RXV 646285 Owner's Manual

OPERATING PROCEDURES

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
OPERATING PROCEDURES

SERIAL NUMBER LOCATION

Three serial number and manufacture date code labels are on the vehicle. One of the labels is located on the steering
column, the second label is located on the frame member under the front splash shied on the driver side, and the third is
located on the passenger side frame rail at the rear of the vehicle (Figure 1).
Design changes occur on a continuous basis. To get the correct components for the vehicle, the PIN number, manufac-
ture date code, serial number or vehicle model, must be supplied.
Serial Number
Serial Number Location on Steering Column
Serial Number
Serial Number
Serial Number Location on Rear Frame
Serial Number Location on Front Frame
Figure 1 Serial Number Locations
Improper use of the vehicle or the lack of proper maintenance may result in damage or decreased
performance.
27
Owner's Guide