Barco RLM W8 Service Manual page 33

No. Code 1 Code 2
0-16 0x8D 0xCD
0-17 0x8E 0xCE
0-18 0x8F 0xCF
0-19 0x93 0xD3
0-20 0x98 0xD8
0-21 0x99 0xD9
0-22 0x9A 0xDA
0-23 0x9D 0xDD
0-24 0xA3 0xE3
0-25 0xAA 0xEA
0-26 0xAD 0xED
Table : Barco IR Codes & Keynames
RS232 Keyname
src.3
src.4
src.5
saturat
pause
text
auto.img
asp.sw
pip.sw
pip.swap
address
- 33 -
Remote
Button
Switch the active source to source 3.
Switch the active source to source 4.
Switch the active source to source 5.
Switch to the next color sturation mode.
COLOR
Switch the pause key.
P AUSE
Switch the text on/off mode.
TEXT
Switch the auto image key.
AUTO IMAGE
Switch to the next aspect ratio.
Switch to next "PIP Select" state.
Swap the PIP image with the active
source image.
Activates remote backlighting only
when pressed momentarily. When held
ADDRESS
for 5 seconds or more the IR code for
toggling the projector IO light will be
transmitted.
Description