Kit Inspection; Kit Contents - GREAT PLANES P-6E HAWK Instruction Manual

Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Great Planes Product Support. When reporting defective or missing parts, use the part names exactly as they
are written in the Kit Contents list on this page.
14
20
21
13 9
1 Left Top Wing
2 Right Top Wing
3 Left Bottom Wing
4 Right Bottom Wing
5 Fuselage
6 Stabilizer
7 Fin
Forward Top Wing Joiner (3)
Forward Bottom Wing Joiner (3)
Aft Top Wing Joiner (1)
Aft Bottom Wing Joiner (1)
Tail Gear Wire w/Bushing (1)
Aluminum Landing Gear (1)
Guns (2)
Stopper Set (1)
Clunks (2)
Aluminum Tubes (3)
Colored Fuel Tubing (3)
Pickup Tube (2)
Radio Tray (1)
6.4x6.4x44mm Hardwood
Stick (4)
"N" Strut Brackets (8)
#64 Rubber Band (3)
Handle Plates (2)

KIT INSPECTION

Great Planes Product Support:
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@greatplanes.com

KIT CONTENTS

11
1
3
7
18
15
16
Kit Contents (Photographed)
8 Elevators (2)
9 Rudder
10 Fin Cover
11 Cowl
12 Molded Exhaust (2)
13 4" Foam Wheels (2)
14 Fuel Tank
Kit Contents (Not Photographed)
Handle Ends (8)
Handle Spreaders (8)
Handle Centers (4)
Weight Box Bottom (1)
Weight Box Top (1)
Weight Box Front (1)
Weight Box Back (1)
Weight Box Sides (2)
Weight Box Sticks (2)
Cockpit Coaming (1)
Pilot (1)
1" Tail Wheel (1)
#8 x 5/8" Sheet Metal Screw
8-32 Blind Nuts (4)
8-32 x 1-1/4" SHC Screw (4)
#8 Washer (8)
#8 Lock Washer (8)
8-32 x 1" SHC Screw (4)
5
2
4
12
15
10
17
4-40 x 1/2" SHC Screw (20)
4-40 x 3/4" SHC Screw (4)
#4 Lock Washer (12)
#4 Nylon Lock Nut (8)
#4 Flat Washer (28)
3/16" Axles (2)
3/16" Wheel Collars (4)
6-32 Set Screws (2)
Nylon Axle Nut (2)
#2 x 3/8" Sheet Metal Screw (2)
#2 Flat Washer (2)
#4 x 1/2" SMS (32)
4-40 x 12" Pushrod (2)
Large Control Horn (5)
4-40 Threaded Metal Clevis (5)
.093" Solder Clevis (4)
4-40 Nut (5)
Clevis Retainers (10)
5
19
21
13
6
8
8
15 "N" Struts (2)
16 Left Center Cabane
17 Right Center Cabane
18 Turtle Deck
19 Wind Screen
20 Engine Mount Halves (L&R)
21 Landing Gear Cover
4-40 x 36" Threaded One End
Pushrod (3)
2-56 x 17-1/2" Threaded One
End Pushrod (1)
Nylon Clevis (1)
Brass Pushrod Connector (1)
Nylon Pushrod Keeper (1)
4-40 x 1/4" SHC screw (1)
24" Gray Outer Prod Tube (1)
6-32 x 1/4" SHC Screw (2)
Hinge Strip (1)
1/4-20 x 2" Nylon Wing Bolts (2)
1/4-20 Blind Nuts (2)
3/32" Wheel Collar (1)
4-40 Set Screw (1)
4-40 Blind Nut (4)
4-40 x 1" SHC Screw (4)