Automatic Paper Cut Settings - Epson TM-T20II Software User Manual

TM-T20II Software Installer
B
Configure the following items referring to the preview on the right portion of the screen.
Note:
Settings other than Extra Upper Space Reduction and Extra Lower Space Reduction are disabled due to the
Advanced Printer Driver being in graphics mode.
Setting
Extra Upper Space Reduction
Extra Lower Space Reduction
Line Space Reduction Rate
Line Feed Reduction Rate
Barcode Height Reduction Rate
C
Click the Set button. The settings are reflected to the printer.

Automatic Paper Cut Settings

Allows you to configure whether to cut paper and print a logo when the cover is closed.
Software User's Manual
TM-T20II Utility
Description
Selects whether to reduce the upper margin or not. Enable this to cut out the
extra upper margin that is created before the first print data is printed.
Selects whether to reduce the lower margin or not. Enable this to cut out the
lower margin that is created from the time the last line is printed until the paper
is automatically cut.
Selects a reduction ratio of line spacing during printing. The minimum pitch is
two dots. If reduction results in a line spacing of less than 2 dots, the line
spacing will be reset to 2 dots.
Selects a reduction ratio of line spacing of blank lines. This setting is ignored for
the portion set to be cut out by the Extra Upper Space Reduction setting. When
you advance the paper by inserting line feeds in order to cut the paper
manually, you may not be able to advance the paper until the last line reaches
the cut position because of this reduction setting.
Selects a reduction ratio of barcode height. The barcode height cannot be
reduced to less than 30-dots height. This setting can cause the barcode size to
fall outside the barcode standards.
71