TM-T20II Software Installer
Setting
When automatic paper cut activates:
When specified pulse 1 (2 pin) occurs:
When specified pulse 2 (5 pin) occurs:
Buzzer:
D
Click the Set button. The settings are reflected in the printer.
Other Convenient Functions
Printer driver can be also used the ways shown below.
❏ Print by Registering Logo to Printer
❏ Sending Commands
❏ Print Device Font in .NET Environment
❏ Printing start position setting
❏ Print the 80mm width layout with 58mm width
❏ Alias name setting to font
❏ Creation of emulation font
❏ Replacing function of device font
❏ Printing Control Settings
Note:
For detail, see Advanced Printer Driver Ver.5 Printer Manual.
Software User's Manual
Using the Printer Driver
Description
Configure the buzzer setting when automatic paper cutting takes place.
Configure the buzzer setting when the specified pulse is generated.
Configure the buzzer setting when the specified pulse is generated.
Test the buzzer. Select a sound pattern. To test the buzzer sound, click the
Test button.
54