Epson TM-T20II Software User Manual page 56

TM-T20II Software Installer
If you have checked Run TM-T20II Utility at Step 10 of Easy Install procedure, start from Step 2.
A
Select Start - All Programs - EPSON - TM-T20II Software - TM-T20II Utility.
B
The following screen appears. Select the printer to use and click the OK button.
If you wish to change the language that appears in the TM-T20II Utility, click the Select Language button.
If the printer is not displayed, click the Add Port button. Then go to the following section; U See
Communication Port and Starting the TM-T20II Utility" on page
Note:
❏ Click the Add Port button when you want to newly configure a port of the printer.
U See "Adding a Communication Port and Starting the TM-T20II Utility" on page 57
❏ To delete a port, select the port and click the Delete Port button.
C
The TM-T20II Utility is started. When the communication with the printer is established, the printer settings
obtained from the printer are displayed in the Printer settings screen.
To recognize the connected printer when connected via USB, run the Test Printing after running TM-T20II
Utility, or check the serial number on one of the sides of the printer and the serial number of TM-T20II Utility.
When executing TM-T20II Utility for the first time, it does not boot if the communication with the printer
cannot be established. Once the communication is established, the utility can boot using the previous printer
setting information even if it is offline.
Software User's Manual
TM-T20II Utility
57.
56
"Adding a