Epson TM-T20II Software User Manual page 32

TM-T20II Software Installer
D
TM-T20II Utility is installed.
Proceed to Step 12 if you do not install any other utility or driver.
The installation is started without displaying any other screens.
E
EpsonNet Config is installed.
The installation is started without displaying any other screens.
F
EpsonNet Simple Viewer is installed.
Proceed to Step 12 if you do not install any other utility or driver.
The installation is started without displaying any other screens.
G
Install the Epson TM Virtual Port Driver.
The EPSON TM Virtual Port Driver Ver. x.xx - InstallShield Wizard screen appears. Select the language used
for installation and click the OK button.
H
The Welcome to the EPSON TM Virtual Port Driver Ver. x.xx Setup Wizard screen appears. Click the Next
button.
I
The License Agreement screen appears. Read the content and select the I accept the terms in the license
agreement. Then click the Next button.
J
The Ready to Install the Program screen appears. Then click the Install button.
K
When the following screen appears, click the Restart Later button.
Note:
If you restart your PC at this point, the installation process may not be completely performed. Be sure to select the
Restart Later button.
L
The InstallShield Wizard Complete screen appears. Click the Finish button.
If the restart of your PC is requested, select Yes, I want to restart my computer now. and click the Finish
button.
Software User's Manual
Installation
32