Event - Dahua HCVR5204A Series User Manual

2) The proxy server software developed from the SDK. Please open the software and
input the global setup. Please make sure the auto connection port here is the same as the
port you set in the previous step.
3) Now you can add device. Please do not input default port number such as the TCP port
in the mapping port number. The device ID here shall be the same with the ID you input in
Figure 4-73. Click Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means
your registration is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be domain. But you need to register a domain name
before you run proxy device server.

4.10.3 Event

4.10.3.1 Detect
In the main menu, from Setting->Event->Detect, you can see motion detect interface.
See Figure 4-74.There is three detection types: motion detection, video loss,
tampering.

The video loss has no detection region and sensitivity setup and tampering has no
detection region setup.

You can see motion detect icon if current channel has enabled motion detect
alarm.

You can drag you mouse to set motion detect region. Please click OK button to
save current region setup. Right click mouse to exit current interface.
Figure 4-73
127