Color - Dahua HCVR5204A Series User Manual

In Figure 4-14, input tour value and then click
to stop call.
Call Scan
In Figure 4-14, input Scan value and then click
to stop call.
Rotate
In Figure 4-14, click
System supports preset, tour, pattern, scan, rotate, light and etc function.
Note:

Preset, tour and pattern all need the value to be the control parameters. You can
define it as you require.

You need to refer to your camera user's manual for Aux definition. In some cases, it
can be used for special process.
Aux
Click , system goes to the following interface. The options here are defined by the
protocol. The aux number is corresponding to the aux on-off button of the decoder. See
Figure 4-20.

4.4.3 Color

Here you can set hue, brightness, contrast, saturation, gain, white level, color mode
and etc. See Figure 4-21.
to enable the camera to rotate.
Figure 4-20
to call a tour. Click again
to call a tour. Click again
81