U Series - Dahua HCVR5204A Series User Manual

4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
7. Put the cover in accordance
with the clip and then place the
upper cover back.

3.2.3 1.5U series

This series DVR max has four SATA HDDs. Please use HDD of 7200rpm or higher.
1. Loosen the screws of the
upper cover.
4. Unfasten the HDD power
cable.
5.
Fix the HDD firmly.
8. Secure the screws in the
rear panel and the side panel.
2. Line up the HDD to the four
holes of the HDD bracket.
5.
Use the special data cable to
connect the HDD and the SATA
port
6. Connect the HDD cable and
power cable.
3. Use four screws to fix HDD.
6. Insert the HDD power cable.
Close the chassis and fix the
screws to secure firmly.
60