Table of Contents
Advertisement
6-3
Accessing the Inside of the System
Performing maintenance on componenets such as fans requires access to the inside
of the server system. Follow the steps below to remove the top/left side cover to
gain access to the inside of the 6037R-TXRF.
If the system has been installed to a rack, carefully pull it out on the rails until the
top cover is exposed.
1. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time. If necessary, you may need to remove the chas-
sis cover screw.
2. Once the top cover is released from the locked position, slide the cover
toward the rear of the chassis and lift the cover off the unit.
Figure 6-2. Accessing the Inside of the System
Release Tab
1
1
Chapter 6: Advanced Chassis Setup
1
1
6-3
1
2
Advertisement
Table of Contents
