Hyundai TRC 817 ADR3 Instruction Manual page 75

26 RANDOM button
27 Repeat range select button (A-B)
28 REPEAT button
29 ZOOM button
30 OSD button
31 ANGLE button
32 PROGRAM button
33
CLEAR button
Play any track of the disc in random mode.
Repeat play between A-B point for all discs
1) Press „A-B" button once at the point where
repeat play is started („SET A" appears on the
TV screen)
2) Press „A-B" button again at the point where
repeat play is stopped. („A TO B" appears on
the TV screen)
3) To cancel, press A-B" button again („CLEAR A
TO B" appears on the TV screen)
Each press of the REPEAT button wil change the
repeat mode.
During MP4/VCD/CD playback,there are three
modes: Repeat single ,Repeat all and off
During DVD,playback,there are fou modes:Repeat
chapter, Repeat Title, Repeat all and off.
Note:During VCD playback,the PCB mode must be
set off.
ZOOM 2x → ZOOM 3x → ZOOM 4x → ZOOM 1/2x
→ ZOOM 1/3x → ZOOM 1/4x → RESTORE
Remark: When press ZOOM, then press  will
zoom up, press  will zoom down, presszoom
right, press zoom left.
During PLAY/PAUSE mode:
1) Single remain
2) Single elapsed
3) Total remain
1) 2) 3) appears in sequently.
*Note: Pressing OSD button PAUSE mode PAUSE
indication disappear on TV screen
When you watch match ,musical or drama in DVD/
JPEG disc,you can press this key to choose many
diffrence angle to watch in detail.
STOP mode
• Press PROG. Button ,enter desired track in
sequence
• Press PLAY button, the desired track will be play
sequence.
Press this button to clear program information.
ENG - 75
ENG