Menu Button; Rear Panel - OSEE RMD7023 User Manual

4.3.3 MENU BUTTON

When you want to change the value of a parameter, you may use MENU, and you can follow four
steps.

Step 1:
Press MENU, and you can enter the main MENU.

Step 2:
Press buttons of ∧（up）or ∨(down) to choose an option, and the selected sub-MENU icon will
display in yellow. When you get one and press ENTER, and you can enter the sub-MENU.

Step 3:
Press buttons of ∧（up）or ∨(down) to choose a parameter, and the selected parameter will display
in yellow. Press ENTER, and press ∧ or ∨ to acquire the exact value. Press ENTER to set some
value.

Step 4:
Press MENU to return. You can follow the same step to set other parameters.
In a word, when you set a parameter, the buttons of ENTER，MENU，∧ and ∨ will be used
frequently. The function of each button is listed below.
ENTER: Enter the sub-menu and set the value of a parameter.
MENU: Return to the super-menu with no saving.
∧（up）or ∨(down): Switch the options in the same menu.
in all sub-menu of main menu, pressing "Menu" is to cancel the current set value and
Note:
return back to the menu of top level. If setting a value of some parameter, it's required to
press "Enter" to save current set value.

4.4 Rear Panel

Connectors
HD-SDI/SD-SDI inputs comply with SMPTE259M，SMPTE292M / ITU-R BT601.
Composite Video inputs comply with SMPTE-170M.
Tally lamps are active, when connected to ground.
RMD7023 LCD MONITOR User Manual
—9—