Download Print this page

Advertisement

NOTE: Load the envelope into the manual feed slot with the printing surface facing up .
NOTE: Pull the envelope out completely when you reload the envelope into the manual feed slot .
NOTE: Do not put more than one envelope in the manual feed slot at one time, as it may cause a jam .
NOTE: Make sure the envelope is straight and in the correct position on the manual feed slot . If it is not, the
envelope may not be fed correctly, resulting in a skewed printout or a paper jam .
6. Send your print job to the machine.
NOTE: Change your print preferences in the Print dialog box before sending the print job from your computer .
Settings
Paper Size
Media Type
7. After the printed envelope comes out of the machine, put in the next envelope. Repeat for each envelope that
you want to print.
8. When you have finished printing, return the two levers that you adjusted in former step back to their original
positions.
9. Close the back cover (the face-up output tray) until it locks in the closed position.

Paper Settings

• Change the Paper Size
When you change the size of the paper you load in the tray, you must change the paper size setting on the LCD
at the same time.
• Change the Paper Type
To get the best print quality, set the machine for the type of paper you are using.
• Set the Check Size
42
Paper Handling
Options for Envelopes
Com-10
DL
C5
Monarch
Envelopes
Env. Thick
Env. Thin

Advertisement

   Also See for Dell E515dw

   Related Manuals for Dell E515dw

This manual also for:

E515dn, E514dw

Comments to this Manuals

Symbols: 0
Latest comments: