Energy Supply Of The On-Board Computer; Resetting Nyon - Bosch Nyon Operating Instructions Manual

English – 30

Energy supply of the on-board computer

If the on-board computer is in the holder 4, a sufficiently charged eBike
battery pack is inserted into the eBike and the eBike system is turned on,
then the Nyon battery pack is powered by the eBike battery pack.
If the on-board computer is removed from the holder 4, the energy is sup-
plied via the Nyon battery pack. If the Nyon battery pack is weak, a warning
message appears on the display.
To charge the Nyon battery pack, insert the on-board computer back into
the holder 4. Note that if you do not charge the eBike battery pack straight
away, the eBike system will automatically switch off after 10 minutes of in-
activity. In this case, the charging of the Nyon battery pack will also cease.
You can also charge the on-board computer via the USB port. Open the
protective cap 9. Connect the USB port 8 of the on-board computer via a
micro USB cable with a standard USB charger (not included in the delivery)
or the USB port of a computer (5 V charging voltage, max 500 mA charging
current).
If the on-board computer is removed from the holder 4, all values of the
features are saved and can still be displayed.
Without recharging the Nyon battery pack, date and time will remain up to
a maximum of 6 months. When switching back on, date and time are reset
after a successful GPS fix.
Note: To achieve maximum lifetime of the Nyon battery pack, you should
recharge it every 6 months if not using it.

Resetting Nyon

If, contrary to expectations, Nyon can no longer be operated, then Nyon
can be reset by simultaneously pressing the buttons 1, 2, 5 and 6. Carry
out the reset only if absolutely necessary, as various configurations may
be lost.
W 276 001 DPNen | (21.8.15) Bosch eBike Systems