Switching The Ebike System On/Off; Power Supply Of The On-Board Computer - Bosch Kiox BUI330 Original Operating Instructions

Switching the eBike system on/off

The following options are available for switching on the eBike system:
– Once the on-board computer and the eBike battery are fitted, briefly
press the on/off button (4) on the on-board computer.
– With the on-board computer inserted, push the on/off button on the
eBike battery (bicycle manufacturer-specific solutions are possible when
there is no access to the battery on/off button; see the battery operating
instructions).
The drive is activated as soon as you start pedalling (except if you are using
the push-assistance function or if the assistance level is set to OFF). The mo-
tor output depends on the settings of the assistance level on the on-board
computer.
As soon as you stop pedalling when in normal operation, or as soon as you
have reached a speed of 25/45 km/h, the eBike drive switches off the as-
sistance. The drive is automatically reactivated as soon you start pedalling
again and the speed is below 25/45 km/h.
The following options are available for switching off the eBike system:
– Briefly press the on/off button (4) of the on-board computer.
– Switch off the eBike battery using its on/off button (bicycle manufac-
turer-specific solutions are possible when there is no access to the bat-
tery on/off button; see the bicycle manufacturer operating instructions).
– Remove the on-board computer from its holder.
If no power is drawn from the eBike drive for about 10 minutes (e.g. because
the eBike is not moving) and no button is pressed on the on-board computer
or the operating unit of the eBike, the eBike system, and therefore also the
battery, will switch off automatically to save energy.

Power supply of the on-board computer

If the on-board computer is in the holder (5), a sufficiently charged eBike
battery is inserted into the eBike and the eBike system is switched on, then
the on-board computer battery is powered and charged by the eBike bat-
tery.
If the on-board computer is removed from the holder (5), the power is sup-
plied by the on-board computer battery. If the on-board computer battery's
charge is running low, a warning message appears on the display.
To charge the on-board computer battery, slide the on-board computer back
onto the holder (5). Note that if you do not charge the eBike battery straight
Bosch eBike Systems
English – 15
1 270 020 Ken | (25.08.2020)