Operating Logic - Bosch Nyon Operating Instructions Manual

English – 14

Operating logic

A change in the display can be achieved during the trip via the operating
unit 10. This way both hands can stay on the handlebars while cycling.
With the control elements on the on-board computer, you have the
following options:
– Switch the on-board computer on or off using the On/Off button 5.
– The default mode of operation in "Settings">"My Nyon" can be
reached via the "Home" (2 or 12) button.
– The bike lights can be switched on or off using the bike light button 6.
– Use the joystick 1 to navigate through the respective operating modes.
Make a selection by pressing the joystick 1.

Map & Naviga on
Press left on the joystick 1 to overlay the active operating mode with the
main menu and to switch it to the main menu (see picture above).
If you press the joystick 1 right while in the active operating mode, the
current screen is overlayed with the potential configuration options of the
current operating mode. Move the joystick to the desired option and select
it by pressing the joystick 1.
Tip: If you are in an active operating mode, you can switch directly to the
next operating mode by pressing the joystick 1 up or down.
If Nyon is on the eBike, "Ride" is displayed after switching on the operating
mode. If Nyon is not mounted on the eBike, "Dashboard" is displayed on
the operating mode.
W 276 001 DPNen | (21.8.15) Bosch eBike Systems