Initial Operation; Requirements; Switching The Ebike System On/Off - Bosch Nyon Operating Instructions Manual

English – 16

Initial Operation

Requirements

The eBike system can only be activated when the following requirements
are met:
– A sufficiently charged eBike battery pack is inserted (see operating
instructions of the battery pack).
– The on-board computer is properly inserted in the holder (see "Inserting
and removing the on-board computer", page English – 17).

Switching the eBike System On/Off

Options for switching on the eBike system:
– Place the on-board computer into the holder 4.
– When the on-board computer and the eBike battery pack are inserted,
briefly press the On/Off button 5 of the on-board computer.
– When the on-board computer is inserted, press the On/Off button of the
eBike battery pack (see battery pack operating instructions).
The drive is activated as soon as you step on the pedals (except when in the
push assistance/start assistance function, see "Switching the Push/Start
Aid On/Off", page English – 33). The motor output depends on the settings
of the assistance level on the on-board computer.
Version Cruise:As soon as you stop pedalling when in normal operation,
or as soon as you have reached a speed of 25 km/h, the assistance from
the eBike drive unit is switched off. The drive is automatically re-activated
as soon you start pedalling again and the speed is below 25 km/h.
Version Speed:As soon as you stop pedalling when in normal operation, or
as soon as you have reached a speed of 45 km/h the assistance from the
eBike drive is switched off. The drive is automatically re-activated as soon
as you start pedalling and the speed is below 45 km/h.
Options for switching off the eBike system:
– Press the On/Off button 5 of the on-board computer for at least 1 second.
– Switch the eBike battery pack off by its On/Off button (see battery pack
operating instructions).
– Remove the on-board computer out of its holder.
If no power is drawn from the drive for about 10 minutes (e.g. because the
eBike is not moving) or no button is pressed on the Nyon, the eBike system
will shut down automatically to save energy.
W 276 001 DPNen | (21.8.15) Bosch eBike Systems