Power Trim - AEG BP300302 User Manual

Hide thumbs Also See for BP300302:
Table of Contents

Advertisement

CA35

POWER TRIM

The Power Trim system allows operator to raise and lower drive unit
for trailering, beaching, launching and shallow water operation. Pow-
er Trim also allows operator to adjust drive unit angle, while under-
way, to provide ideal boat angle for varying load and water condi-
tions.
1
In most cases, best overall performance is obtained with drive unit
adjusted so boat will run at a 3 to 5 angle to water.
CA36
Trimming Drive Unit Up/Out Will:
Lift bow of boat.
Generally increase top speed.
Increase clearance over submerged objects.
Cause boat to accelerate and plane off slower.
In excess, cause porpoising and/or propeller ventilation.
Cause overheating if trimmed up/out beyond gimbal ring support
flanges.
Never trim drive unit up/out using TRAILER switch while boat is underway.
Use extreme caution when operating with drive unit raised, Severe damage to
drive unit may result it unit is raised beyond the gimbal ring support flanges
at engine speeds above 1200 RPM.
CA37
Trimming Drive Unit Down/In Will:
Help boat accelerate and plane off quicker.
Generally improve ride in choppy water.
In most cases, reduce boat speed.
Alpha V8
!
CAUTION
35

Advertisement

Table of Contents
loading

Table of Contents