Table of Contents
Advertisement
CA75
Drive Unit and Transom Assembly
6
Lubricate gimbal bearing with 2-4-C Marine Lubricant.
7
For propeller shaft lubrication, see PROPELLER.
8
Lubricate engine coupler splines thru grease fitting on coupler.
NOTE: Later engines are equipped with a sealed engine cou-
pler and Perm-a-Lube U-joints. The sealed coupler and shaft
splines can be lubricated without removing the drive unit. The
Perm-a-Lube U-joints do not require lubrication. The engine
coupler is lubricated with Quicksilver Engine Coupler Spline
Grease. Contact your Authorized MerCruiser Dealer for this ser-
vice.
Speedometer water hose must be disconnected from drive unit BEFORE re-
moving drive unit. Failure to do this will result in a broken fitting if drive unit
is removed.
Alpha V8
!
CAUTION
73
Advertisement
Table of Contents
