Table of Contents
Advertisement
Available languages
Available languages
10 www.aeg.com
Display
5.3 Heat setting
To activate a coking zone or increase the
heat setting, turn the knob clockwise.
The display shows the heat setting.
To decrease the heat setting, turn the
knob counterclockwise. To deactivate,
turn the knob to the position
5.4 Automatic heat up
The automatic heat up function lets you
get the necessary heat setting in a short-
er time. It sets the highest heat setting
for some time (refer to the diagram), and
then decreases it to the necessary heat
setting.
To start the automatic heat up:
1.
Turn the knob for the cooking zone
to position A.
display.
2.
Immediately set the necessary heat
setting.
3.
To deactivate the function, turn the
knob to the off position.
11
10
9
8
7
6
5
4
3
2
1
0
5.5 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10
minutes at most. After that, the induc-
tion cooking zone automatically changes
back to the highest heat setting. To acti-
vate, turn the knob to the necessary heat
setting, then touch
the display. To deactivate, change the
heat setting.
The automatic switch-off is on.
comes on in the
1
2
3
4
5
6
.
comes on in
Description
5.6 Power management
The power management divides the
power between two cooking zones in a
pair (see the illustration). The Power
function increases the power to the max-
imum level for one cooking zone in the
pair and decreases the power in the sec-
.
ond cooking zone. The display for the
reduced zone changes between two lev-
els.
5.7 Timer
Use it to set an automatic switch-off time
for a cooking zone.
1.
Set the cooking zone. Touch
again and again until the indicator
for the necessary cooking zone
comes on.
2.
Set the heat setting for the cooking
zone. You can also set it after you
7
8
9
activate the timer.
3.
To activate the timer or change the
set time, touch + or - on the hob
control panel. The maximum time
you can set is 99 minutes.
The indicator of the cooking zone
flashes slowly. The timer starts to
count down.
4.
To see the remaining time, touch
again and again until the indicator
for the necessary cooking zone flash-
es quickly. The display shows the re-
maining time.
You must set the cooking zone
before you activate the timer.
Advertisement
Chapters
Table of Contents
