Download Print this page

Intelix DIGI-HD60C Installation Manual page 4

Advertisement

I/O Connections
HDMI
Twisted Pair
IR Input
IR Output
RS232
24V DC Power
Supported Audio, Video and Control
Maximum Video Compatibility at 60 m
Maximum Video Compatibility at 35 m
Supported 3D Formats
Video Compliance
Embedded Audio
Input DDC Signal
Input Video Signal
IR Carrier Frequency Range
RS232 Baud Rate
HDBaseT Signal Characteristics
Maximum Distance
Cable Requirements
Bandwidth
Gain
Resolution Range
Signal to Noise Ratio (SNR)
Return Loss
Total Harmonic Distortion (THD)
Min-Max Signal Level
Differential Phase Error
Chassis and Environmental
Enclosure
Dimensions
Shipping Weight
Operating Temperature (Environment)
Operating Temperature (Chassis)
Operating Humidity (Environment)
Storage Temperature (Environment)
Storage Humidity (Environment)
Power, ESD, and Regulatory
Maximum Power Consumption
Power Supply (Not Included)
ESD Protection
Regulatory
Other
Standard Warranty
Diagnostic Indicators
DIGI-HD60C-R Compatible Transmitters
DIGI-HD60C-S Compatible Receivers
Included Items
Accessories
Power Supply
IR Emitter
IR Eye
Universal Mounting Bracket
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF and electrical interference, and cable patches.
Technical Specifications
One (1) HDMI Type A Receptacle
One (1) 8P8C port (Shielded RJ45)
One (1) 3.5mm TRS Jack
One (1) 3.5mm TS Jack
One (1) 3-Pole Euroblock connector
One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
Deep Color 36/30/24 Bit at 1080p
Deep Color 48 Bit at 1080p, 3D, and 4k x 2k
Field Alternative (interlaced), Frame Packing, Line Alternative Full, Side-By-Side Half, Side-By-
Side Full, 2D + Depth, 2D + Depth + Graphics + Depth
HDMI, HDCP, and CEC (Consumer Electronics Control)
Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
5.0 volts p-p (TTL)
0.5 to 1.0 volts p-p
33-55kHz at 5 volts
Up to 115200 baud
60 m
Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
10.2 Gbps
0 dB – 10 dB at 100 MHz
800x600 – 1920x1200
> 70 dB at 100 MHz over 100 m
< -30 dB at 5 KHz
< 0.005% at 1 KHz
< 0.3 V – 1.45 Vp-p
±10° at 135 MHz over 100 m
Painted steel
110mm x 76mm x 24mm (4.33 in x 2.99 in x 0.95 in)
0.5 kg (1.1 lbs.)
0° to +40° C (+32° to +104° F)
31° C (88° F) (S); 38° C (100° F) (R)
20% to 90%, Non-condensing
-10° to +60° C (+14° to +140° F)
20% to 90%, Non-condensing
8 watts (S), 22 watts (R)
24vDC / 1.5 Amp
15kV
CE, RoHS
2 Years
Link and power LEDs
DIGI-HD70-S, DIGI-HD60C-S, DIGI-HDE-S, FLX-BO4A, DIGI-44B, DIGI-88B, ASW-WP, DIGI-P123,
DIGI-P52
DIGI-HD70-R, DIGI-HD60C-R, DIGI-HDE-S, FLX-BI4
Installation Guide
PS-24D-25
DIGIB-EMT
DIGIB-EYE
DIGI-PMK1
8001 Terrace Ave.
Suite #201
Middleton, WI 53562
DIGI-HD60C Installation Guide
Phone: 608-831-0880
Toll-Free: 866-4-MATMIX
Fax: 608-831-1833

Advertisement

loading
Need help?

Need help?

Do you have a question about the DIGI-HD60C and is the answer not in the manual?

Subscribe to Our Youtube Channel