Remove Lithium Battery - Brady BMP 21-PLUS User Manual

10
Power Source
Loading the Lithium Ion Battery Pack

Remove Lithium Battery

1.
®
BMP 21-PLUS/BMP
Squeeze the finger tabs
located on both sides of the
battery compartment door,
then swing the battery
compartment door up and
out. (The door will come
off.)
®
21-LAB User's Manual
Placing your thumb at the
2.
base of the printer, use
your forefingers to gently
pull up on the raised
portion of the battery. This
releases the top of the
battery from the contacts.
Grasp the raised battery
3.
and pull it up and out from
the bottom contact slots.