Brady BMP 21-PLUS User Manual page 80

68
Breaker Box (BMP
Selecting a Label Type
On the Breaker Box editing screen, enter the number of poles for each breaker and the
corresponding identifying data. The number of the breaker displays in the upper right corner of
the editing screen.
8.
9.
10.
11.
12.
BMP ® 21-PLUS/BMP ® 21-LAB User's Manual
®
21-PLUS only)
Using the up and down navigation keys, navigate to the breaker number.
When on the breaker number, use the left or right navigation keys to toggle to another
breaker number.
Breaker field accessed
Navigate to the Poles: number (directly under the breaker number) and enter the number
of poles for that breaker. (You can also use the navigation keys to toggle to different
numbers.)
Navigate to the first numbered data field and enter the identifying information for that
breaker.
Repeat Steps 7 through 10 for each breaker.
Breaker box editing screens
(6 breakers, 1 and 2 poles)
Figure 8 • Rotated printout of breaker box label type
Pole field accessed
Printout of breaker box, with partition turned on
(notice space between breakers based on
number of poles)