Log Placement - Bo24(F-R) - Vermont Castings VFF32LI Installation & Operating Instructions Manual

VFF Vent Free Fireplace System
INSTALL 24" (F, R) BERKLEY OAK LOGS ON
NATURAL BLAZE BURNER (AVAILABLE FOR
MONESSEN SYSTEMS ONLY)
1. Place the #1 log (the "chunk") on the grate bar right side
of the burner adjacent to the controls. Figure 22
Figure 22 -
Place Ember Chunk Log #1
2. Place front right log (#2) on right pin located on burner
and right grate bar. Figure 23. Slide log #1 forward so
that it is tight against log #2.
Figure 23 -
Place Right Front Log #2
3. Place right rear log (#3) on pin located on rear support
bracket and rest left side of log on front right log. Figure
24.
Right Rear
Log #3
Figure 24 -
Place Right Rear Log #3
24
Ember Chunk
Log #1
Right Front
Log #2
LOG AND MEDIA PLACEMENT
4. Place left rear log (#4) on pin located on rear support
bracket on left side. Figure 25
Left Rear Log #4
Figure 25 -
Place Left Rear Log #4
5. Place left front log (#5) on left pin located on burner and
left grate bar. Rest top right portion of log on right front
log. Figure 26
Left Front Log #5
Figure 26 -
Place Left Front Log #5
6. Place top left log (#6) on unit by placing grooved portion
of log onto left grate bar with bark facing outward. Rest
front part of log in groove on left front log. Figure 27
Middle Left
Log #6
Figure 27 -
Place Middle Left Log #6
20308184