Vermont Castings VCT323SSN/P Assembly Procedures page 2

VCT323SSN/P Assembly
Step 1: Unpack Carton and Verify Contents
Use a sharp cutting tool to remove the packaging. Remove layers of reinforced cardboard. Be careful not to
scratch or damage the finish of the metal parts when removing the sleeves and protective plastic. Open grill
lid and remove the parts. Unpack all parts and compare all contents to the parts list. Refer to the parts list for
fastener detail.
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly is strongly
recommended.
Carton Contents
C.I. Cart Base
Cart Bottom Panel
Back Panel
Cart Right Side
Cart Left Side
Cart Door
Grease Shield
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or moving
the grill is recommended.
2
Inside Grill
Cooking Grates (2)
Heat Plates (3)
Grease Tray
Grease Cup
Grease Cup Holder
Swivel Caster (1)
Swivel Caster w/Brake (1)
Stationary Wheels (2)
Cart Mounting Brackets (2)
Upper Cart Brace
Cylinder Retainer
Left Side Shelf
Right Side Shelf
Shelf Spacer (2)
Shelf Support Brackets (4)
Manual Bag w/Hardware, Match
Holder
30006291