Head Unit / Cover (C) Unit - Nikon SB-800 Repair Manual

Head unit
・Put the wire between ribs.
・Attach 2 screws (#16).
＃ 16×2
・Bundle the yellow and orange wires of E PCB together with tape (TA-0001).
Cover (C) unit
・ Assemble the 2 head stopeer metals (#30)
into the cover (C) unit, and attach 4 screws
(#31).
・Assemble the lever (#23) into the cover (C)
unit by attaching the screw (#24).
・Assemble the pin (#21) into #20, then pass
them through the spring (#22) to assemble
into the cover (C) unit.
Rib
Taped on Page A6
Yellow/orange
wires
E PCB
#31×2
#24
#23
- A8 ･ SB-800 -
INC
FSA03501-R.3613.A
TA-0001
Adhesive: Cemedine 575
#30×2
Cover (C) unit
#22
#31×2
#21
#20