Adjustment Software (J18355) - Nikon SB-800 Repair Manual

INC
FSA03501-R.3613.A
Inspection & adjustment software ( J18355 )
<Operating environment> The following operating environment is required for installing this program on PC.
PC : IBM PC/AT compatible
OS : Windows XP Home Edition, Windows 2000,Windows Millennium Edition (Me),
Windows 98 Second Edition (SE)
CPU : 80486 100MHz Pentium 1.2GHz
RAM (memory) :32MB or more, HD 6MB-or-more free disk space is required when installing
Monitor resolution : 800×600 pixels or more
Interface : RS232C or USB
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is available.
<Notice on start-up>
When starting this program, close all other applications.
If some other applications are running, this program may not be activated.
<Procedure for installation>
The file (PSB800.EXE) of this program is provided via FD or e-mail.
Because this is the self-extracting file, decompress the file before installing, following the next procedure.
1. Create a folder for installation under a name you like and PC drive. (e.g.) C:\SB800
2. Copy the file (PSB800.EXE) in the created folder.
3. Double-click on the pasted file to display the following screen.
Press the OK button, then decompression starts.
4. When the decompression of file is finished, the file (SB800.EXE) is created.
5. The installation is completed.
<Start-up of Program>
1. Double-click the file (SB800.EXE), then the Inspection & Adjustment program for SB800 starts.
2. To display in ENGLISH, select the radio button "ENGLISH" in "LANGUAGE" in the lower right-hand
corner of the screen .
3. When the "HISTORY" button at the lower-left is pressed, the program version will be displayed.
4. Select each item button according to operation.
Follow the instructions on the next screen that will be shown after pressing the item button.
5. To finish the program, press the "Close (×)" button in the right-hand corner of the screen or "QUIT".
- A25 ･ SB-800 -