Inspection & Adjustment Of Focusing Ligh - Nikon SB-800 Repair Manual

Preparations
1. Camera (F5)
2. AF lens (of any type) with lens cap
3. Tripod
4. Chart of inspecting FL (Copy Page A27 of the Repair Manual for use.)
Procedure
① Arrange the equipment and materials as shown in the
above, and set the AF mode of camera to S.
② In case NO AF-ILL is indicated on LCD of SB-800,
have AF-ILL displayed by the custom setting.
③ Detach the FL cover (SS060-29) of SB-800, and press the
release button halfway to lighten AF-Assist illuminator.
④ Adjust by using 3 screws (SG012-88) so that the light
projected on the inspection chart covers the reference
frames completely and fits within the allowable limits of
the frame.
⑤ After the adjustment, attach 3 screws（SG012-88）with
Screw Lock. Attach The FL cover(SS060-29).
Inspection & adjustment of Focusing light
1.5 ｍ from the film plane
Lens cap
Center of lens
- A26 ･ SB-800 -
90°
Chart of inspecting FL
Wall
Reference
frame
INC
FSA03501-R.3613.A
Frame within the
allowable limits
Center of lens