Table of Contents
Advertisement
54
Finalizing the Installation
7
Replace the two side fireback clips to secure the firebacks in place (see step 5).
8
Replace the exhaust restrictor. NOTE: you may need to adjust the restrictor position, consult the
installation manual for details.
9
Before replacing the glass tray, use a screwdriver to bend the four light deflectors up as shown
below. The deflectors must be bent up approximately 2" for the crushed glass to glow correctly.
10 Replace the glass tray and secure it with the four screws removed earlier.
11 Replace the cast burner cover, making sure the notch on the cover fits over the pilot assembly on the
right side.
© Travis Industries
(for qualified installers only)
4140926
100-01395
Advertisement
Table of Contents
