Pre Rec Switch; Input Lock Switch; Analog Out Switch; Mic Atten Switch - Marantz PMD670 User Manual

OFF ON
AUTO MARK
ON
OFF
6
PRE REC
OFF
ON
7
INPUT LOCK
INPUT A-B REPEAT
a

6. PRE REC switch

OFF ON
PRE REC
When power is on the PMD670 is constantly
saving 2 seconds of audio input. This is called
pre record cache. When recording is started by
sliding the REC switch, or resumed from REC
PAUSE by sliding the REC switch the pre-re-
corded 2 seconds is recorded.
OFF: Turns the 2 second pre-record cache off.
ON: Leaves the 2 second pre-record cache on.
Factory default: PRE REC switch at ON.
OFF
ON
INPUT LOCK
OFF: When the INPUT LOCK switch is at OFF
push and release the INPUT button (a) to tab
through the input choices. The selection "times
out" to the displayed input choice in 5 seconds.
REC REMAIN
Example
display:
ON: When the INPUT LOCK switch is at ON
pushing the INPUT button (a) does nothing
(skips the input selection choices).
Factory default: INPUT LOCK switch at OFF.
8
STEREO
0dB -20dB
R
L
9
MIC ATTEN
ANALOG OUT
SINGLE FLAT
OFF ALL
ANC
LIMITER
ON ALC MANUAL
OFF
EDL PLAY LEVEL CONT.
EDIT
MARK
Lets you turn off pre
record cache if it is not
desired.

7. INPUT LOCK switch

The INPUT LOCK switch
lets you lock your selected
input settings with a switch
covered by the Security
cover.
TIME
L
-dB
00 20 12
40 6
R
INT
MIC
mono with INT MIC
STEREO
L R
ANALOG OUT
Applies to playback output to LINE OUT, and
Internal speaker or headphones.
L: Audio recorded on the Left channel is output to
both the left and right output channels.
If the recording is dual level mono (a mono input
was recorded onto both the right and left channels)
the L setting outputs the audio at a normal level
while the right is reduced -15dB.
STEREO: Audio recorded on the Left channel is
output to the left output channel, and audio re-
corded on the Right channel is output to the right
output channel. Both channels are output to the
internal speaker.
R: Audio recorded on the Right stereo channel is
output to both the left and right output channels.
Factory default: ANALOG OUT switch at STEREO.
0dB
-20dB
MIC ATTEN
0dB: No microphone attenuation.
-20dB: Input from a microphone(s) connected to
0 over
2
the XLR MIC IN jacks is cut by -20dB.
-dB
Factory default: MIC ATTEN switch at 0dB.
- 15 -

8. ANALOG OUT switch

Selects the audio output
channel for playback.

9. MIC ATTEN switch

The microphone attenuation
switch permits the direct use
of microphones that differ in
sensitivity.