Technical Data; Before Use - Hilti DX 460 GR Original Operating Instructions

Powder-actuated tool for grating applications

Hide thumbs Also See for DX 460 GR:

Table of Contents

5. Technical data

DX 460 GR tool

Weight

Tool length

Recommended maximum fastening rate

Cartridges

Power regulation

Right of technical changes reserved

6.1

Tool inspection

● Ensure that there is no cartridge strip in the tool. If

there is a cartridge strip in the tool, remove it by hand

from the tool.

● Check all external parts of the tool for damage at reg-

ular intervals and check that all controls operate prop-

erly. Do not operate the tool when parts are damaged or

when the controls do not operate properly. If necessary,

have the tool repaired at a Hilti service centre.

● Check the buffer and piston for wear (see "8. Care

and maintenance").

Printed: 12.08.2013 | Doc-Nr: PUB / 5129640 / 000 / 01

3.85 Kg (8.49 lb)

478 mm (18.8")

700 per hour

6.8/11 M (27 cal. short) green, yellow, red, black

4 cartridge power levels, regulation wheel with locking

function

6.2 Choosing the right fastener guide / piston / fas-

tener combination

Use of the wrong combination may present a risk of

injury. Damage to the tool may also result or fastening

quality may be negatively affected.

Table of Contents