Hilti DX 460 GR Original Operating Instructions page 9

cant force. The tool can be fired only when pressed ful-
ly against the work surface in this way.
In addition, all Hilti DX tools are equipped with an unin-
tentional firing safety device
from firing if the trigger is pulled and the tool then pressed
against the work surface. The tool can be fired only when
it is first pressed (1.) against the work surface correct-
en
ly and the trigger then pulled (2.).
4. Cartridges, accessoires and fasteners
Threaded studs
Ordering designation
X-EM
X-CRM
X-GR-RU
X-FCM Grating discs
Ordering designation
X-FCM
X-FCM-M
X-FCM-R
X-FCP Checker plates
Ordering designation
X-FCP-M
X-FCP-R
18
Printed: 12.08.2013 | Doc-Nr: PUB / 5129640 / 000 / 01
. This prevents the tool
5
Application
Zinc plated stud for indoors, dry and non corrosive environment
Stainless steel studs for outdoor or/and corrosive environement (not recommended
in tunnels, swimming pool or similar environment)
Duplex coated (comparable to Hot Dip Galvanised steel) discs for indoor, midly
corrosive environment, or for limited lifetime use. Not for use in marine atmosphere
or in heavily polluted environement
Application
Zinc plated discs for indoors, dry and non corrosive environment
Duplex coated (comparable to Hot Dip Galvanised steel) discs for indoor, midly
corrosive environment, or for limited lifetime use. Not for use in marine atmosphere
or in heavily polluted environement
Stainless steel discs for outdoor or/and corrosive environement (not recommended
in tunnels, swimming pool or similar environment)
Application
Duplex coated (comparable to Hot Dip Galvanised steel) discs for indoor, midly
corrosive environment, or for limited lifetime use. Not for use in marine atmosphere
or in heavily polluted environment
Stainless steel plates for outdoor or/and corrosive environement (not recommended
in tunnels, swimming pool or similar environment)
2
3
4
5
2
1