Hangar 9 Twist 60 ARF Assembly Manual page 15


.Step 6
Install.the.propeller.and.spinner.onto.the.engine...
Consult.the.instructions.provided.with.your.engine..
for.further.details.

.Step 7
Place.the.rubber.bands.into.the.notches.in.the.former.
inside.the.fuselage.as.shown.
Section 3A: Two-Stroke Engine Installation

.Step 8
Place.the.tank.inside.the.fuselage.with.the.vent.towards.
the.top.of.the.fuselage..Use.the.rubber.bands.to.hold.the.
fuel.tank.in.position.inside.the.fuselage.

.Step 9
Attach.the.lines.from.the.fuel.tank.to.the.engine..The..
green.line.will.attach.to.the.fuel.inlet,.and.the.red.to..
the.muffler.pressure.
15