ZyXEL Communications ZyWALL 1050 User Manual page 63

Table 7 Navigation Panel Summary (Configuration Menu Only) (continued)
LINK TAB
Interface Ethernet
Port Grouping
VLAN
Bridge
PPPoE/PPTP
Auxiliary
Trunk
IPSec VPN VPN Connection
VPN Gateway
Concentrator
SA Monitor
Routing RIP
Protocol
OSPF
Zone
Device HA VRRP Group
Synchronize
ISP Account
DDNS
Policy
Route Policy Route
Static Route
Firewall
App Patrol Configuration
Other Protocol
IDP General
Profile
Custom
Signatures
Update
Content Filter General
Filtering Profile
Cache
Virtual Server
Chapter 3 Web Configurator
FUNCTION
Use this screen to manage Ethernet interfaces and virtual Ethernet
interfaces.
Use this screen to configure physical port groups.
Use this screen to create and manage VLAN interfaces and virtual VLAN
interfaces.
Use this screen to create and manage bridges and virtual bridge interfaces.
Use this screen to create and manage PPPoE/PPTP interfaces.
Use this screen to manage the DIAL BACKUP port.
Use this screen to create and manage trunks for load balancing and link HA.
Use this screen to configure IPSec tunnels.
Use this screen to configure IKE tunnels.
Use this screen to configure VPN concentrators (hub-and-spoke VPN).
Use this screen to monitor current VPN tunnels.
Use this screen to configure device-level RIP settings.
Use this screen to configure device-level OSPF settings, including areas
and virtual links.
Use this screen to configure zones used to define various policies.
Use this screen to define and configure virtual groups of redundant routers.
Use this screen to manage synchronization of ZyWALL configuration
between master routers and backup routers in virtual groups of redundant
routers.
Use this screen to create and manage ISP account information for PPPoE/
PPTP interfaces.
Use this screen to define and manage domain names and DDNS servers.
Use this screen to create and manage routing policies.
Use this screen to create and manage IP static routing information.
Use this screen to create and manage level-3 traffic rules.
Use this screen to manage traffic for instant messenger, peer-to-peer,
streaming, and general protocols.
Use this screen to manage other kinds of traffic.
Use this screen to look at and manage IDP bindings.
Use this screen to create and manage IDP profiles.
Use this screen to create, import, or export custom signatures.
Use this screen to schedule signature updates and to update signature
information immediately.
Use this screen to create and manage content filter policies.
Use this screen to create and manage the detailed filtering rules for content
filtering policies.
Use this screen to manage the URL cache in the ZyWALL.
Use this screen to set up and manage port forwarding rules.
ZyWALL 1050 User's Guide
63