Figure 168 Network > Ipsec Vpn > Concentrator > Edit; Figure 169 Network > Ipsec Vpn > Concentrator > Edit > Member; Table 73 Network > Ipsec Vpn > Concentrator > Edit - ZyXEL Communications ZyWALL 1050 User Manual

Figure 168 Network > IPSec VPN > Concentrator > Edit
Each field is described in the following table.
Table 73 Network > IPSec VPN > Concentrator > Edit
LABEL
Name
#
Member List
Add icon
OK
Cancel
Chapter 12 IPSec VPN
DESCRIPTION
Enter the name of the concentrator. You may use 1-31 alphanumeric characters,
_
underscores( ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
This field is a sequential value, and it is not associated with a specific member in
the concentrator.
This field displays the name of each member in the concentrator.
Note: You must disable policy enforcement in each member. See
Section 12.3.2 on page
Click the Popup icon to change this member in the group. The following screen
appears.
Figure 169 Network > IPSec VPN > Concentrator > Edit > Member
This column provides icons to add members to and remove members from the
concentrator.
To add a member to the concentrator, click the Add icon at the top of the column
to add the new member at the beginning of the list, or click the Add icon next to an
existing member to add the new member after the existing one. The web
configurator chooses a new member alphabetically. You can use the Popup icon
next to the new member to change this.
To remove a member from the concentrator, click on the Remove icon next to the
member. The web configurator confirms that you want to remove the member.
Click OK to save your changes in the ZyWALL.
Click Cancel to exit this screen without saving.
ZyWALL 1050 User's Guide
230.
253