Other Protocol Screen - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
Table 103 Policy > Application Patrol > Configuration > Edit (continued)
LABEL
Destination
Log
Add icon

20.4 Other Protocol Screen

The Other Protocol screen controls the default policy for applications; in other words, you
can control what the ZyWALL does when it does not recognize the application. This screen
also allows you to add, edit, and remove conditions to this default policy.
To access this screen, login to the web configurator. When the main screen appears, click once
on Policy to open the Policy tree, and then click once on App. Patrol. Click once on the
Other Protocol tab. The following screen appears.
328
DESCRIPTION
Select a destination address or address group for whom this condition applies.
Select any if the condition is effective for every destination.
Select what kind of record the ZyWALL creates when the condition is satisfied.
Choices are:
no - the ZyWALL does not record anything
log - the ZyWALL creates a record in the log
log alert - the ZyWALL creates an alert
Please see Chapter 36 on page 525
This column provides icons to add, move, and remove conditions for the exception.
To add a condition, click the Add icon at the top of the column or next to each
condition. A new condition appears in the appropriate place in the list.
To remove a condition, click on the Remove icon next to the condition. The web
configurator confirms that you want to delete the condition before doing so.
To move a condition up or down in the list, click on the Move to N icon next to the
condition, and type the line number (# field) where you want to move this condition.
The # field is updated accordingly.
for more information.
Chapter 20 Application Patrol