Vpn Status; Figure 110 Status > Vpn Status; Table 34 Status > Vpn Status - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide
Table 33 Status (continued)
LABEL
Services
Renew/Dial

7.2 VPN Status

Use this screen to look at the VPN tunnels that are currently established. To access this screen,
click VPN Status in the Status screen.
Figure 110 Status > VPN Status
The following table describes the labels in this screen.
Table 34 Status > VPN Status
LABEL
#
Name
Encapsulation
IPSec Algorithm
Poll Interval
Set Interval
Stop
160
DESCRIPTION
This field lists which services the interface provides to the network. Examples
include DHCP relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a
if the interface does not provide any services to the network.
Use this field to get or to update the IP address for the interface. Click Renew to
send a new DHCP request to a DHCP server. Click the Connect icon to try to
connect the auxiliary interface or a PPPoE/PPTP interface. If the interface cannot
use one of these ways to get or to update its IP address, this field displays n/a.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays how the IPSec SA is encapsulated.
This field displays the encryption and authentication algorithms used in the SA.
Enter how often you want this window to be updated automatically, and click Set
Interval.
Click this to set the Poll Interval the screen uses.
Click this to stop the window from updating automatically. You can start it again by
setting the Poll Interval and clicking Set Interval.
Chapter 7 Status