Advertisement
Transformer operations
Locking your speeder into a single operational state
T
o select a single operational state for your Lionel speeder (for example, forward only), you
can deactivate the reverse unit's sequencing function with the reverse unit switch.
To lock your speeder into a particular state, cycle the speeder through forward, neutral,
reverse, neutral, and so on. Turn off track power and remove the speeder from the track when
it operates in the state that preceeds your desired state. For example, remove the speeder from
the track when it is in neutral, just before forward. Throw the switch on the underside of the
unit, place the unit back on the track, and the speeder is locked in the next operational state.
Refer to Figure 1 for the switch location.
When you no longer want single-direction operation, just slide the switch back to ON.
Your speeder's reverse unit will "reset" to forward after any power interruption
Note!
lasting five seconds or longer, regardless of the original locked-out direction.
Underside
of the
Speeder
Figure 1. Switch location
REAR
FRONT
5
Reverse unit switch
Advertisement
